Description
3M Klett-Power
Self-adhesive.
Water resistant
450g / pair of discs*
16 Pads Ø 19mm
For indoor or outdoor
Klett-power – The single component press-on fastener system can also be used for technical applications.
It can be opened and closed up to 1000 times. A second component is not needed as the parts fasten to each other.
For the temporary fastening of many different objects such as multi-socket plugs, tools, picture frames etc.
Application ideas:
The application surfaces must be smooth, solid, clean, dry and free of grease and dust. Do not use any cleaners that contain oil or silicon. Use white sprits or lSO propanol.
Remove the liner, do not touch the adhesive. Apply the Klett-Power strips using firm pressure over the whole surface for a minimum of 10 seconds.
The ideal application temperature lies between 15c and 25c. Do not apply strain for 24 hours.
Close the pair of strips using pressure. The closure can be easily opened by splitting.
* The maximum holding power is only achieved under optimal conditions (tested according to A.F.E.R.A. 5012) for permanent interior applications the maximum load is 1Kg / 10cm fastener. For exterior applications the maximum recommended load is 0,33 Kg / 10 cm fastener on most smooth, solid surfaces. Klett-power is less suitable for application to rough or structured surface which are not sufficiently solid, such as paper (coated or varnished), cardboard, porous concrete. Not for use on materials such as PE, PP, PTFE. Overhead applications are not recommended.
Barcode: 4054596293175
Brand: 3M
Sub-Type: Contact Adhesive
Weight: 0.02Kg
Additional information
| Weight | 0.02 kg |
|---|---|
| Dimensions | 12 × 0.05 × 20 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.